With the MoreClockTool (MCT) we now want to logically round off the MorePowerTool (MPT) and the Red BIOS Editor (RBE) and replace the Wattman from AMD’s driver packages for simple overclocking. Which also makes it clear that the MCT can only be used for newer AMD graphics cards. Even if our software seems rather manageable at first glance: all the necessary functions are on board, but you can do without the entire overhead as long as you don’t really need it. As the author of this tool, Hellm followed the community’s desire for a small, lightweight program that is based directly on AMD’s libraries, that logically complements MorePowerTool and is in some respects even significantly more user-friendly because many long paths can be shortened (and also modified). .
We are starting the official hosting of the tool today after some community activists have been busy testing it in a closed beta phase and have already found the worst blunders. Because even if the surface is deliberately kept simple – there are highly complex things under the hood and the omnipresent error devil is always present at such a party anyway. For this reason, the program (also with regard to the next generation of AMD graphics cards) is in constant further development, which is why I would also like to refer to the forum thread attached below.
However, I would like to ask you to take note of the disclaimer before downloading and using it, because the versions published here are not commercial software, but you use them and overclock them at your own risk. If you want to know more about the MorePowerTool or don’t know it at all, we recommend this useful tool:
DISCLAIMER – MUST READ!
- The software offered here for free download is still in the test stage and does not claim to be fully stable and functional! It is the basis for broad tests by the community and is then transferred to new versions after the tests have been passed and a final check and correction has been carried out.
- The functionality of the software represents a massive intervention in the control of the graphics card and its driver! The use of the MCT, MPT and the RBE is entirely at your own risk and on your own responsibility. It may only be carried out by experienced users for pure evaluation purposes! Only those who agree to the following conditions may also download and use this software.
- The publication igor’sLAB is not the author or commercial distributor of this software and can therefore assume no liability whatsoever for the software, its use and the possible consequences of improper use. This also applies to possible program incompatibilities or data loss.
- Anyone who uses the MCT, MPT or RBE fully agrees to these conditions when downloading and waives any claims that may arise from the consequences of use.
- Long-term operation of the components with values not specified by the manufacturer can lead to irreparable damage! The protective functions (switch-off limits) are all still activated, but of course other components can also suffer unforeseen damage!
- The software linked here in the article is a purely experimental intervention in the system and not intended with all settings for 24/7 use in productive systems!
- The higher voltages that are now possible are possibly capable of damaging or destroying the hardware modified in this way in the short or long term.
- The software accesses settings of service or third party programs, in particular those of the AMD Wattman. This data may be copyrighted material of its authors.
If you agree with the disclaimer, you can download the current and older versions. There will also be a detailed changelog for each version if it is important.
