Foil for raised beds: These 4 materials protect the wood

Wood protection
Which films are suitable for raised beds? Four materials in the star check

Raised wooden beds are practical in many ways: They offer enough space for growing vegetables, are easy on the back and last for a long time – provided you have used the right film for lining them. Otherwise, the natural material will rot faster than necessary.

Who to be If you want to build your own raised bed, you usually use wood because it can withstand external weather influences such as sun, wind and rain for a long time. However, if the natural material is permanently exposed to moisture, it begins to rot – and rots. This makes it all the more important to line the inside of the wood with soil before filling it in order to make it last longer. Special films for raised beds that are waterproof but also breathable are suitable for this. Below we will introduce you to four different materials.

Wood protection: Four films for raised beds in comparison

1. Bubble wrap

The basic idea of ​​a drainage film is to protect the masonry of a building from moisture. However, it is also ideal for lining raised beds to prevent the wood from rotting. The quite rigid one Bubble wrap is attached so that the knobs point outwards. This should allow rain or irrigation water to drain more easily and the air to circulate better. In addition, so-called condensation is avoided. According to the manufacturer, the material is pressure- and tear-resistant and free of harmful substances.

2. EPDM film

Pond liners are made from ethylene-propylene-diene (monomer) rubber, known as EPDM for short. Due to their cold-resistant, tear-resistant and extremely stretchy properties, these are very suitable for lining raised beds. The material usually only contains small amounts of plasticizers and is still so flexible that it adapts to any surface. However, have EPDM films a proud price. They are significantly more expensive than, for example, bubble wrap. However, the manufacturer promises a 20-year guarantee.

3. PVC film

The thermoplastic polyvinyl chloride, or PVC for short, can also be found in many pond liners. The material is significantly cheaper than EPDM, but also has chemical plasticizers for more elasticity and so that the film remains supple for as long as possible. However, these evaporate over time and can therefore penetrate into the earth. For this reason is PVC film Although suitable for wood protection, it is not the best choice when it comes to cladding a raised bed. Even if the material is easy to lay.

4. PE film

Polyethylene (PE) is also a thermoplastic that is also suitable for lining raised beds. The UV-resistant material is not as durable as PVC, but does not release harmful plasticizers into the soil. In addition, should PE film be biodegradable, making it very environmentally friendly. The rigid material can only be shaped with patience and effort, but if you fill it with earth, it is pressed against the wooden walls – unfortunately sometimes too much, which can result in condensation.

Tip: With one Baldur voucher you can save money on your first purchase.

Properly line raised beds with foil: This is how it works

If you want to line a raised bed with foil, you should place the material all around in one piece so that all the wood is seamlessly covered from the inside. The film can be more easily attached to the raised bed using staples or roofing felt nails. Important: Cut the material in advance so that the beginning and end overlap at least 30 centimeters. In order to protect the wood from below, where it comes into contact with the ground and therefore moisture, it is advisable to place the raised bed frame on stones.

Source: My beautiful garden

You might also be interested in:

This article contains so-called affiliate links. Further information are available here.