Aids
Caring for nubuck leather properly: This is what you need to keep in mind
There is a large selection of tools for nubuck leather care
© Norasit Kaewsai / Getty Images
As with any other leather, caring for nubuck leather is extremely complicated. We will show you how to properly treat the sensitive material.
Nubuck leather, like suede, is a fine suede. Its velvety-soft surface is characterized by the slightly sanded grain side – the material is therefore particularly breathable, but also more sensitive to UV radiation. This makes it all the more important to care for the leather regularly and clean it properly. We’ll show you how this works without damaging the surface.
The best cleaning tips for nubuck leather
- Tip 1: The degree of soiling plays a crucial role in cleaning: If the nubuck leather is just a little dusty, the surface should be cleaned with a special suede brush be processed carefully. The crepe pad consists of fine rubber slats that remove fine dust particles particularly gently. The leather brush can also be used to roughen the material again after using care products.
- Tip 2: If the leather is slightly dirty or has unsightly salt and water marks, it is a Mesh sponge the better choice. It not only removes stubborn dirt from the material, but also roughens the nubuck leather. Alternatively, one can also Foam rubber block Remedy – however, the dry cleaner should be used with caution as it can damage the material if too much pressure is applied to the block and thus the leather.
- Tip 3: If the leather is very dirty, the dirty areas must first be washed with warm water and a dirt brush be cleaned – alternatively there is also a special one Cleansing foam for all materials. Afterwards, you must always make sure to let the damp areas dry in a warm place, otherwise the leather may smell unpleasant or even develop mold.
The most important care tips for nubuck leather
This plays a role in optimal nubuck leather careImpregnation plays a crucial role. It is primarily used to protect the surface against dirt, UV radiation and moisture. So that Waterproofing spray To penetrate the fibers and achieve its optimal effect, it must be applied to the shoes or clothing before other care products are used.
You should proceed as follows:
- Take the Leather brush in your hand and loosen the fibers by lightly brushing.
- Waterproof the nubuck leather as stated on the packaging instructions.
- Repeat the first step again.
- Then use a liquid care product especially for nubuck.
- Allow the leather to dry and then repeat the first step.
You might also be interested in:
This article contains so-called affiliate links. Further information are available here.