The importance of kitchen layouts
The kitchen is a room that you use every day and where you undoubtedly spend a lot of time. Utensils are multiplying and it can be difficult to find a place for everything.
The more functional your kitchen is, the more pleasure you will enjoy cooking in it. This is why it is important to dwell a bit on storage and look for solutions that make it practical. For example, pot lids are often difficult to find their place in a kitchen. They are often stacked on top of each other and are therefore difficult to pick and grab.
Besides that, they risk slipping to the bottom of a cupboard and becoming impossible to find. In short, you will understand, a tidy kitchen is welcoming and will allow you to cook with confidence and without unnecessary waste of time.
A drip tray to store your lids
A simple and inexpensive solution to storing your pot lids is to use a dish rack. You can then store it in a cupboard, on a shelf or leave it on the counter to keep the lids close at hand. They are like this vertically arranged, they are perfectly visible and cannot slide to the bottom of the cupboard or drawer. For example, in the dish rack you can store your lids by size. To pick one up, you won’t have to dig any more, since they’re all visible at a glance.
Compartmentalize your cupboards
In the case of a smaller kitchen, if it has cupboards or if you have some nearby, you can use them to store your utensils and dishes. To take full advantage of it, it is important to store everything properly. You must therefore opt for clever arrangements. You can, for example, create spaces using pieces of rod, wooden chopsticks, etc.
You just have to fix them vertically between two shelves to create small spaces in which you will just have to slide your lids. They will thus be kept straight thanks to the chopsticks. The realization of this solution only takes a few minutes to benefit from optimal storage. Also found in commerce shelves to add in the cupboards to increase storage space.
Opt for a plate shelf
There are also commercially available plate shelves. There are different kinds, which will allow you to choose a model in harmony with the decoration of your kitchen. You can install this type of shelf near your cooking space to have your pot lids close at hand. For more DIY enthusiasts, it is also possible to make this type of shelves. Then, you just have to store the lids in it by placing them vertically. They will be perfectly visible and you will quickly find the one you are looking for.
Bet on dividers in the pot drawer
If your kitchen is equipped with pot drawers, you can invest in drawer organizers. There is a wide choice in the trade to meet different needs. However, you can also make them yourself. Choose a solution that allows vertical storage. This way, you will easily find the cover you need. You can also install boards vertically that you will have to glue to prevent them from falling.
Put the doors to work
For a space-saving solution, you can store your pot lids inside the cupboard doors. This way you optimize space and your lids are stored within easy reach. For this type of arrangement, several solutions are available to you. You can opt for adhesive hooks. In this case, you need two per cover to retain it by its lower part. Test for the correct spacing, but also verify that the closet door still closes after the cover is in place.
You can also use a support bar. These small metal rails allow the cover to slide inside. It is then the handle of the cover that prevents it from slipping and falling.
Use a magnetic knife bar
Pot lids can also be installed on magnetic knife holders or any other magnetic support. You can install this system inside a cupboard door, near the cooking space, etc. Your lids are easy to store and grab. However, this solution is not suitable for pan lids which, due to their weight or their material, would not magnetize.
Create lid organizers with hangers
You can also use a hanger to achieve supports for your lids. For this, you need thin hangers to which you can give the appropriate shape. Here’s how to do it:
- Pull in the center of the lower part of the hanger until you get a diamond;
- On each side of the low point of the rhombus, pull the rod upwards, this makes it possible to form a sort of M;
- Pull the part forming the M forwards;
- Slide your lid, adjusting according to its shape;
- You can then create another one that you will hang on the hook part, etc.
Choose magazine racks
For the storage of your lids, it is possible touse one or more magazine rack. To have your lids close at hand, you can install this or these magazine rack wherever it suits you.