6 good reasons to adopt it


© Leroy Merlin © Lapeyre

1 – A stunning splashback at a low price

The adhesive splashback is the cheapest on the market. It comes in a dizzying variety of patterns, textures and colors. Whatever style appeals to you, there is no doubt that you will find a model that is perfectly in tune with your desires!

And not to spoil anything, it imitates to perfection many materials.

Credence Adhesive Marble
© Ciment Factory

Do you love marble or natural stone? This type of noble coating at once, even if you opt for an imitation type Dekton®. With the adhesive splashback, count less than 100 € to dress a 2 meter long splashback. It’s hard to find a more advantageous quality / price ratio!

2 – An easy and quick to install splashback

Forget about the materials to be fetched and the complicated implementation! With adhesive splashback, there’s no need to embark on tedious work or call in a craftsman. It usually comes in a roll, or in the form of plates or even independent stickers in tile format. Easy to transport, simple and quick to install, it really has it all!

Credence Victorian Plates
© Ciment Factory

In some cases, it is technically impossible to dress the splashback with cement tiles or concrete. An adhesive splashback is the perfect alternative! Thin, flexible and light, the adhesive splashback is the perfect alternative to give it a makeover.

Concrete-style adhesive backsplash
© Ciment Factory

Before purchasing your adhesive splashback, carefully note the dimensions. As with a classic coating, it is recommended to provide an additional 10%, to compensate for the falls associated with the cuts.

Even if you have never done DIY, you will have no trouble installing an adhesive splashback. All you need is a level, a pencil, a soft squeegee or rag, and a cutter:

  1. Start by carefully washing the splashback to remove all traces of fat;
  2. Take a pencil and your level, then draw the line that will mark the top of your splashback;
  3. Take your roll of adhesive backsplash and remove the protective film 20 to 25 cm;
  4. Position the corner of the adhesive splashback at the top left and apply it to the wall making sure it is flat and straight, and expel the air using the squeegee or a rag.

If necessary, use a cutter to make the cutouts.

If you have opted for independent adhesive plates or tiles, the procedure is absolutely the same!

3 – A multi-use splashback

Benefiting from a beautiful robustness and a strong adhesion, the adherent credenza is adapted to all kinds of supports. For a harmonious makeover of the kitchen, you can therefore also use it for the island or for the back of the niches.

Adhesive Floor Tiles Matching The Credence
© Leroy Merlin

Adhesive splashback is available at many DIY stores, and sometimes you’ll even find a perfectly matching adhesive floor tile there. For a complete makeover of the kitchen, you can combine splashback and floor tiles laid like a carpet … in a 100% adhesive version!

Credence And Floor Mat
© Lapeyre

4 – A credenza that sticks to trends

With adhesive splashback, it’s easy to enjoy a trendy kitchen: you can replace it easily, as often as you want. You can therefore dare a color with a strong character, such as duck blue.

Duck Blue Adhesive Credence
© Leroy Merlin

For a wiser decor, try another trendy coating: terrazzo.

Credence Adhesive Terrazzo
© Deco Sticker

What if you mess up? Nothing could be easier than peeling off an adhesive splashback! Just bring your hair dryer to melt the glue. Then remove the splashback. Remove any traces of glue and wash off the wall. You just have to ask a model more to your liking!

5 – An easy-going splashback

Some materials are canon, but demanding. This is particularly the case with wood, which requires a minimum of maintenance to retain all its shine. Some varieties of porous stones must be protected from stains. With adhesive splashback, no more tedious maintenance! A sponge soaked in soapy water to remove the dirt, and voila!

Tile Adhesives
© Smart Tiles

Easy to clean, the adhesive splashback offers you impeccable hygiene: a point not to be overlooked in the kitchen! With it, we therefore dare the rusty metal effect. This oxidized effect is perfect for revamping a rustic or contemporary kitchen in a resolutely factory space. But the surface remains clean and healthy nonetheless!

Metallic Credence
© 99deco

6 – A credenza made to last

Today, adhesive backsplash benefits from remarkable resistance to UV rays, repeated washing and the passage of time. From an aesthetic point of view, it benefits from extremely neat finishes.

Vinyl splashback has excellent adhesion, even near the sink area where it is most exposed to moisture. Only the hob area can be tricky. For the bottom of the hood, it is therefore judicious to prefer an adhesive aluminum splashback.

Slate Effect Alu Credence
© 99deco

The total look is the most beautiful effect. The rendering is very contemporary, and visually, this beautiful continuity makes it possible to visually enlarge the kitchen. However, you can combine two models of adhesive splashback, for example by combining an imitation vinyl tile strip and an aluminum hood with a stainless steel or slate effect, at the level of the hob.





Source link